Deadline of this Job: 27 September 2022
Job Description
• Coordinate with drivers on daily basis to plan the load as well as route.
• Ensure all drivers must follow the on road/drive time and rest time guideline defined by management.
• Track and ensure no driver should overspeed, should not use phone while driving and should not accommodate passengers without approval from In-charge.
• Educate drivers on documentations and reporting process to ensure the driver should report to loading and unloading supervisor on time.
• Follow-up with onroute drivers and make sure they should follow & Acheve TAT defined by management.
• Assist drivers in case of accident or difficulty.
• Ensure no truck should report the material or fuel loss and if they does complete report to HR team for dscipalinary action.
• Prepare daily vehicle report without any delay.
• Prepare weekly drivers performance report and discuss with RM for further action plan.
• Encourage drivers to attract new skilled drivers to join our team
Job Description
• Coordinate with drivers on daily basis to plan the load as well as route.
• Ensure all drivers must follow the on road/drive time and rest time guideline defined by management.
• Track and ensure no driver should overspeed, should not use phone while driving and should not accommodate passengers without approval from In-charge.
• Educate drivers on documentations and reporting process to ensure the driver should report to loading and unloading supervisor on time.
• Follow-up with onroute drivers and make sure they should follow & Acheve TAT defined by management.
• Assist drivers in case of accident or difficulty.
• Ensure no truck should report the material or fuel loss and if they does complete report to HR team for dscipalinary action.
• Prepare daily vehicle report without any delay.
• Prepare weekly drivers performance report and discuss with RM for further action plan.
• Encourage drivers to attract new skilled drivers to join our team
Deadline of this Job: 13 September 2022
JOB DETAILS:
The consultant aims at support BORDA technical department to develop feasibility study concept, proposed design and O&M concepts. The consultancy deliverable shall enable BORDA to understand the current prevailing situation regarding environmental and technical aspect of sanitation and finally come up with a design concept and O&M models for the appropriate intervention.
This activity will be implemented in 40 days and is based on the TOR below:
• Prepare 3 feasibility study reports and 3 technical design proposals based on data collected from three regions I.e Njombe, Zanzibar and Korogwe
• Support BORDA engineer in preparation of 3 feasibility study reports and 3 technical design proposals based on data collected from 3 regions i.e Mwanza, Tunduma and Dodoma
• Review feasibility study concepts prepared for the six regions
• Participate in Project Introduction workshops in 5 project operation areas i.e Mwanza, Dodoma, Korogwe, Tunduma and Njombe, assess sanitation situation and facilitate stakeholders’ workshop to ensure technical concept is covered.
• Ensure all information collected with Data collection consultant are relevant to facilitate design proposal development.
• Support BORDA team to prepare O&M concepts and other training materials based on the proposed infrastructures
• Propose 2 possible areas among 6 operation areas to implement decentralized infrastructures to serve marginalized population
• Propose set of emptying equipment’s required to ensure functionality of two decentralized based on area assessment
• Participate in stakeholders’ workshops and national forums whenever invited on behalf of organization
• Prepare a report of the activities implemented as part of your consultant deliverables
Selection Criteria and Technical Expertise
• Minimum Bachelor degree in Civil Engineering or any related Engineering degree.
• Advance skill in using engineering applications e.g AutoCAD.
• At least 5 years of expertise to carry out decentralized sanitation solution for disadvantages population.
• Having up to date information and knowledge on Sanitation, DEWATS and specific FSM based on national guidelines.
• Fluent in Swahili and English.
• Proven experience in working with the government and sanitation stakeholders.
JOB DETAILS:
The consultant aims at support BORDA technical department to develop feasibility study concept, proposed design and O&M concepts. The consultancy deliverable shall enable BORDA to understand the current prevailing situation regarding environmental and technical aspect of sanitation and finally come up with a design concept and O&M models for the appropriate intervention.
This activity will be implemented in 40 days and is based on the TOR below:
• Prepare 3 feasibility study reports and 3 technical design proposals based on data collected from three regions I.e Njombe, Zanzibar and Korogwe
• Support BORDA engineer in preparation of 3 feasibility study reports and 3 technical design proposals based on data collected from 3 regions i.e Mwanza, Tunduma and Dodoma
• Review feasibility study concepts prepared for the six regions
• Participate in Project Introduction workshops in 5 project operation areas i.e Mwanza, Dodoma, Korogwe, Tunduma and Njombe, assess sanitation situation and facilitate stakeholders’ workshop to ensure technical concept is covered.
• Ensure all information collected with Data collection consultant are relevant to facilitate design proposal development.
• Support BORDA team to prepare O&M concepts and other training materials based on the proposed infrastructures
• Propose 2 possible areas among 6 operation areas to implement decentralized infrastructures to serve marginalized population
• Propose set of emptying equipment’s required to ensure functionality of two decentralized based on area assessment
• Participate in stakeholders’ workshops and national forums whenever invited on behalf of organization
• Prepare a report of the activities implemented as part of your consultant deliverables
Selection Criteria and Technical Expertise
• Minimum Bachelor degree in Civil Engineering or any related Engineering degree.
• Advance skill in using engineering applications e.g AutoCAD.
• At least 5 years of expertise to carry out decentralized sanitation solution for disadvantages population.
• Having up to date information and knowledge on Sanitation, DEWATS and specific FSM based on national guidelines.
• Fluent in Swahili and English.
• Proven experience in working with the government and sanitation stakeholders.
Deadline of this Job: 19 September 2022
JOB DETAILS:
Educational/Professional qualifications: -
• Must have Full Technician Certificate or Ordinary Diploma in Civil Engineering or equivalent from any recognized Learning Institution/ college;
• At least 3 years cumulative experience related to road/bridge construction;
• Experiences in Laboratory/Materials Technician or equivalent will be an added advantage;
• Self motivated, able to work under pressure outside working hours with minimum supervision;
• Must be able to communicate in English language; and
• Must be a Tanzanian Citizen.
Duties and Responsibility
• To monitor and ensure that laboratory and experiments strictly apply the specifications;
• To ensure the implementation of the QA/QC procedures in the project. The entire Quality Check list is to be effectively implemented;
• To Inspect, testing all materials and completed works to ensure compliance with technical specification requirements;
• To ensure that the samples test results conform to the specifications and requirements;
• To monitor that all approved material samples inside the samples room on site are organized, properly stored and labelled;
• To ensure that all materials supplied and procured to site conform to the approved samples;
• To prepare daily reports regarding the work, approved samples and the supplied materials, and check inventories besides keeping records for all materials activities in the project;
• To deliver copies of all laboratory tests to the Materials Engineer at the end of each month to be included in the monthly reports;
• To identify the non-conforming material and mark it rejected and segregate from the Approved materials;
• To evaluate approval options based on quality, cost effectiveness efficiency of service, business standards and other factors for the purpose of meeting or exceeding the required standards; and
• To review test results by Contractor and their respective pavement and materials reports and advice on the way-forward.
JOB DETAILS:
Educational/Professional qualifications: -
• Must have Full Technician Certificate or Ordinary Diploma in Civil Engineering or equivalent from any recognized Learning Institution/ college;
• At least 3 years cumulative experience related to road/bridge construction;
• Experiences in Laboratory/Materials Technician or equivalent will be an added advantage;
• Self motivated, able to work under pressure outside working hours with minimum supervision;
• Must be able to communicate in English language; and
• Must be a Tanzanian Citizen.
Duties and Responsibility
• To monitor and ensure that laboratory and experiments strictly apply the specifications;
• To ensure the implementation of the QA/QC procedures in the project. The entire Quality Check list is to be effectively implemented;
• To Inspect, testing all materials and completed works to ensure compliance with technical specification requirements;
• To ensure that the samples test results conform to the specifications and requirements;
• To monitor that all approved material samples inside the samples room on site are organized, properly stored and labelled;
• To ensure that all materials supplied and procured to site conform to the approved samples;
• To prepare daily reports regarding the work, approved samples and the supplied materials, and check inventories besides keeping records for all materials activities in the project;
• To deliver copies of all laboratory tests to the Materials Engineer at the end of each month to be included in the monthly reports;
• To identify the non-conforming material and mark it rejected and segregate from the Approved materials;
• To evaluate approval options based on quality, cost effectiveness efficiency of service, business standards and other factors for the purpose of meeting or exceeding the required standards; and
• To review test results by Contractor and their respective pavement and materials reports and advice on the way-forward.